Mace MAS-WA-SYS Betriebsanweisung PDF herunterladen (Seite 13)

(1234 or 4-digit

PIN) +

Enter 4-digit PIN for setting

followed by

The panel will display the below image:

Press then to set

the ARM mode

– Toggle 1, 2, 3, 4, 5, 6, 7, 8 to turn each zone ON or OFF

– If no number appears, the zone is turned OFF

– The panel will display the below image:

Press to complete the

setting

Conﬁrm the setting and return the panel to STANDBY

by pressing

h. triGGerS in arm mOde

Example: Zone 1 trigger

Step Description Note

1 Under the “ARM” Mode

The panel will display the below image:

2 System trigger

One beep indicates that the system is triggered.

3 Entry delay 30 seconds

There are 30 seconds of entry delay time with a visual countdown for disarming.

Once an intrusion has occurred (zone triggered under ARM status), the alarm siren

will sound for 1 minute and the panel display ﬂashes RED every 1.5 seconds with the

triggered zone indicated, until the system is disarmed.

*To disarm the system, enter the 4-Digit PIN or press

on the remote control.

Return to ARM mode after

the initial triggering

After the initial triggering, the alarm will immediately sound, without delay, if any

other sensors are triggered.

3.3.3 alert mOde

If in ALERT mode, the Wireless Alarm Panel chime will sound and the Wireless Alarm Panel ﬂashes

GREEN every 1.5 seconds with the triggered zone indicated, when the system detects a visitor in the

protected area. ALERT mode default settings:

Sensor Zone Status (MODE)

• Door/Window Sensor 1

ALERT

• Door/Window Sensor 2

ALERT

• Motion Sensor 8

ALERT

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Keine Kommentare

Mace MAS-WA-SYS Betriebsanweisung Seite 13