Mace DVR1604RW Betriebsanleitung PDF herunterladen (Seite 36)

Network HOST NAME display the name of the recorder .IP is set by using

ST or input the exact numbers to change the IP address（IP address setting

can only be realized in this term）,and then set the correspond

SUBNETMASK and GATEWAY WEB PORT、TCP PORT ：in

accordance with the user’s network condition, the default port is 00080 and

37777.MONITOR can be selected by using ST（TCP/IP、UDP）.Reserve

the setting in SAVE, and restart the recorder.

Note: UDP：The users with manage can monitor each channel freely, and other users can only view after them. Max

5 users can log in.

TCP Protocol：All users are able to monitor any channel. User shall select according to necessity. If the

transmission is under Internet, TCP should be chosen. 2 users at maximum

Motion Detection Select the relevant channel in CH. OUTPUT “●” means

startup alarm relay when detect the motion image; “○” means

non alarm relay. Open or close the function in DELAY

Choose how long you want to continue the recording（1/6、

1/2、1、3……30min）after motion detection is finished.

PRERECORD save the motion detection. SENS has three

levels: LOW, NORMAL, HIGH .TIMING1 、TIMING2

the way of setting the period of time is the same as the setting of ALARMSETTING.

AREA can be accessed by pressing ENTER. The setting area can be divided in 192 sections. Red

section means the current cursor position, and green section is the motion detection area. The no

color area is no motion detection area. Press Fn to locate the current section, then move the cursor to

cover the MD needed area; press Fn again to choose the MD area.

RS232 COMFUNC select super terminal or Keyboard.

BAUDRATE select correspond baud rate. DATA BIT selection 1-8.

STOP BIT three selection 1、1.5 and 2.

VERIFY odd and even

MOTION DETECTION

CH 　 0１

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

ALMOUT

●○○○○○○○○○○○○○○

RECORD

●○○○○○○○○○○○○○○

DELAY 30 SEC TIPS OFF

PRECORD ON

LEVEL HIGH

AREA 　　 SET

TIME1 10:00AM—02:00PM 　 OFF

TIME2 10:00AM—02:00PM 　 OFF

DEFAULT SAVE CANCEL

NETWORK

HOSTNAME DVR1604

ＩＰ　 192.168.000.111

SUBNETMASK 255.255.255.000

GATEWAY 　 192.168.000.001

WEB PORT 00080

TCP PORT 37777

MONITOR 　 TCP

DEFAULT SAVE CANCE

RS232 　

COMFUNC

HYPETERM

BAUDRATE 115200

DATA BIT 8 BIT

STOP BIT 1 BIT

VERYIFY NULL

DEFAULT SAVE CANCEL

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare

Mace DVR1604RW Betriebsanleitung Seite 36

Kommentare zu diesen Handbüchern